How to Cut Copper Pipes With a Pipe Cutter

Copper is a terrific material. It is a soft, malleable, and ductile metal that is an excellent conductor of heat and electricity. It’s no wonder copper is used in so many building and construction applications! So, if you are preparing for a plumbing-related project, copper piping should be at the top of your supply list. But if you are going to work with copper pipes, it is helpful to know how to adjust their lengths in order to properly match various fittings. Fortunately, it couldn’t be easier!

Continue reading to learn how to effectively, and efficiently, cut through copper piping, and where to go to safely dispose your scrap copper.

Indianapolis Copper Metal Recycling
Indianapolis Copper Metal Recycling 317-244-0700

Tool and Supplies You Will Need:

✏ Pipe Cutter
✏ Round File
✏ Microfiber Cloth
✏ Paper Towels
✏ Ketchup (Yes, the condiment)

Getting Started:

You can find all the tools and supplies you need to cut copper at any local home improvement or hardware store. Rather than using a pipe cutter, you may also choose to use a pipe slice or hacks. In this simple guide, we will be focusing on using a pipe For instance, hacks has are not recommended for plumbing pipe projects, and pipe slice devices only allow you to cut one particular size. So if you have various sizes to cut, you must purchase separate devices for each pipe diameter.

A pipe cutter allows for a hassle-free, exact, and easy pipefitting experience. Then again, that’s what you should expect from a tool named precisely after the function it is intended to do. However, it is primarily recommended for pipes with larger diameters. For smaller diameters or thinner pipe walls, you will want to use a pipe slice.

To Use a Pipe Cutter:

Step 1 – Position the pipe inside your pipe cutters. Then tighten the blade just right, being careful to not over-tighten. Over-tightening risks bending the pipe.

Step 2 – Using your hands, twisted pipe around 3 to 4 revolutions, and then remove it from the pipe cutters.

Step 3 – After removing the pipe, you should see a groove made by your revolutions. Slide the pipe back into the pipe cutters so that the groove aligns with the blade. Then secure it once again, but not too tight.

Step 4 – Begin twisting the pipe around several revolutions until it breaks free from the cutters.

Step 5 – Your pipe cutters should have a built-in burner removal tool. Use it to shave off any burrs or raised lips on the inside of your piping. If your pipe cutters do not have this tool, just use a round file instead.

Where to Recycle Scrap Copper in Central Indiana

Call Zore’s Recycling at 317-244-0700 to get started with profitable metal recycling services in Indianapolis, Indiana. Not only has Zore’s Inc. been a family owned and operated company for over 75 years, we pay cash on the spot for your metal commodities. We accept cans, sheet metal, appliances, vehicles, auto parts, equipment, and more! Request a free estimate, today.

This entry was posted in Electronic Recycling, Metal Recycling, Precious Metals and tagged , , , , , , . Bookmark the permalink.