4 Ways to Troubleshoot an Electric Gate Problem

Posted on September 25, 2019 by admin

Electric gates are highly valuable and expensive assets. If you have one, it is in your best interest to keep it in good working condition for as long as possible. Electric gate repair and replacement is not cheap, so when your electric entrance gate stops working properly, it is important to troubleshoot the problem as soon as possible. Most often, if you treat a small problem early on, you can prevent the issue from worsening, and therefore, becoming a more costly repair.

Continue reading to learn the top 4 reasons why your electric gate might not be working, as well as, what you can do with an old, broken gate you no longer have any use for.

Whether your gate is acting strange, refusing to open, and will not close, there could be a long list of reasons why. However, the top four causes for electric gate operation issues are obstructions, power loss, transmitter failure, and in worse cases, motor defects.

❶ Obstructed Pathways

The first cause to check for when your electric gate is acting up are obstructed pathways. In many cases, the reason why a gate won’t open or close is due to something in its way. This could be twigs, piled up gravel, rocks, dog chews, litter, and anything else that might be found on the ground. Clear the track line of the gate, and then try to operate it again to see if the problem is solved. If not, it could be due to power loss or something else.

❷ Power Loss

If your gate’s pathway is not blocked in any way, your next area to check on is the power. Sometimes, the power line can disconnect, or the electrical mains can shut off. Check these, and all peripheral equipment that receives power around the gate, including any wiring. If power loss is not the issue, perhaps it is the transmitter.

❸ Transmitter Issues

If obstructions and power loss are not the reason why your electrical gate are not working, your next task is to check on the transmitter. Sometimes, all you need to do is change the batteries to the transmitter, and your gate will be back to operational. However, it could also be due to any other types of surrounding equipment that also uses batteries, such as keypads, access controls, and more. Check the battery power on these devices to see it solves your issue.

❹ Motor Failure

If none of the above solutions solve your electric gate problem, it could be the motor. In this case, you would need to have your electric gate motor repaired or replaced, depending on the extent of the defect or damage.

Worried About the Cost of Electric Gate Replacement?

Complete two tasks in one by recycling your broken electric gate to an Indianapolis scrap metal recycling center. Why does this complete two tasks? First, you get free haul-away for a heavy and obtrusive piece of junk! Second, you will get paid cash on the spot for the value of the scrap metal, which in turn, can be applied toward the cost of a new electric gate! Best of all, recycling metal contributes to the effort of preserving our natural resources and reducing factory emissions.

How to Scrap Your Old Metal Gate in Indiana

Call Zore’s Recycling at 317-244-0700 to recycle metal in Indianapolis, Indiana. Not only has Zore’s Inc. been a family owned and operated company for over 75 years, we pay cash on the spot for your metal commodities. We accept cans, sheet metal, appliances, vehicles, auto parts, equipment, and more! Request a free estimate, today.

What are Red, Yellow and Green Metals?

Posted on September 9, 2019 by admin

On our planet, and within the core, lies hundreds of thousands of natural ores and minerals that we mine to make metal. Of the vast varieties of metals found within the Earth, all can be categorized as either ferrous or nonferrous. Ferrous metals and alloys contain iron, while nonferrous contain no iron.

Aside from these umbrella categories, metals can be further broken down into more intimate classifications and descriptions, such as precious and noble metals. But have you ever heard of metals being described using color? Well, it is possible that you have come across red metals, yellow metals, and even green metals!

Continue reading to learn facts about each type of metal, including examples and common applications.

Indianapolis Metal Recycling 317-244-0700

Red Metals

Red metal is an informal term used to denote common alloys we know as copper, bronze, and brass. You can probably see quite well that all three of these alloys have a red-like tone, thus earning them the aforementioned moniker. Red metals have several beneficial attributes, such as corrosion resistance, high conductivity, high tensile strength, ductility, and aesthetics. For this reason, they are commonly used to make musical instruments, plumbing parts, wires, marine hardware, sculptures, and more.

Yellow Metals

Also known as Muntz metal, yellow metal is named after an English businessman, George F. Muntz, who received a patent in 1832. Although they may share some of the same types of metal, red and yellow metals are much different. Yellow metals is another informal moniker used to describe a type of brass alloy that contains an average composition of 60% copper and 40% zinc. It’s most common applications is for manufacturing corrosion-resistant machinery parts.

Green Metals

There are actually not metals known as “green” metals, however, you may have heard of electrum, which is often called “green gold.” Wikipedia.com describes electrum as “a naturally occurring alloy of gold and silver, with trace amounts of copper and other metals.” An alloy is a metal that is made up of two or more metals, such as brass, which contains copper and zinc. It’s most common applications throughout history, and even now, are for jewelry, plated plaques and awards, coinage, and investments.

Indianapolis Metal Recycling

Call Zore’s Recycling at 317-244-0700 to get paid cash on the spot for scrap metal, or any items that contain any type of metal, in Indianapolis, Indiana. We pay top-dollar for power tools, sheet metal, appliances, cars, trucks, motorcycles, golf carts, farm equipment, construction equipment, and more. And we guarantee to pay you cash on the spot! Call 317-244-0700 to make fast cash, today!

What is Medium Carbon Steel Used For?

Posted on May 15, 2019 by admin

Medium carbon steel is a grade of ferrous metal, meaning that it contains iron. There are vast applications, and thus, benefits, of this highly ductile and strong alloy. Continue reading to learn more about medium-carbon steel, including its most common applications, and what you can do with your leftover scrap metal.

Medium Carbon Steel

Medium carbon steel is made by adding between 0.3% and 0.7% carbon to steel. In addition to adding carbon, the process of quenching and tempering is used to create this mid-range steel product, which involves heating and cooling the steel, and then softening it to produce a steady tensile strength throughout, referred to as Martensite.

Medium carbon steel is often sought out for applications that require high-tensile strength and ductility. Here are some of the top industries you will find the use of this mid-range steel product:

☑ Structural Steel

One of the top uses for medium carbon steel is to create other steel commodities for the construction of buildings, bridges, and roadways. Common products include steel beams, joints, joiner plates, and more.

☑ Pressured Structures

Another common use for medium-carbon steel are pressured structures due to its high ductility properties. Pressure structures refer to commodities that use hot, high-pressure steam or water, such as boilers, pressurized tanks, water heaters, and more.

☑ Shafts and Gearing

If familiar, you will notice that automotive and mechanical products are often manufactured with medium carbon steel, namely shafts and gear system components. Some examples might include axle shafts, crankshafts, gearing plates, and more.

☑ Railway Applications

The railway system strongly relies on medium carbon steel for several applications, from manufacturing and engineering, to maintenance, safety, and more. Some common applications include railway wheels, tracks, suspensions, and all other metal-components involved in the railway’ suspension.

Where to Sell Scrap Steel in Indy

Is it Easy to Recycle Metal in Indianapolis?

Posted on April 12, 2019 by admin

If you have a cargo of scrap metal on your hands, you should be pleased knowing you’ll will soon be able to turn a profit and relieve yourself of unwanted junk. The first step to recycling metal is taking inventory of the commodities you have to sell. Keep in mind that the larger the freight, the more profit it will render because the price of scrap metal is calculated by weight. However, these prices are always changing, and fluctuate depending on a number of factors.

If the concern of inconvenience is holding you back from getting into the metal recycling industry, you will be pleased to learn that it has never been easier! Continue below to learn which metals can be recycled, how to get started, and who to call for the highest payouts in Indianapolis!

Advantages of Metal Recycling

There are numerous advantages to scrap metal recycling. Cash returns, reusing old goods, and protecting the environment are examples of how recycling metal and other materials can be beneficial. There are various types of alloys that can be reprocessed, so finding some to turn in can be easy. Take some time to learn about these metals if you plan to do some recycling soon.

Recyclable Metals

There are many types of metals that can be recycled and reused, all of which are grouped into two different categorizations: non-ferrous and ferrous. Non-ferrous metals do not contain any iron; whereas, ferrous metals do. See our blog, “A Comparison of Ferrous and Nonferrous Metals” to learn more about these two vital metal classifications. It is important to explore the facilities that buy scraps of metal in your area, and what types they accept for cash. Some facilities do not offer iron alloy reprocessing services. It all depends on the company and their intentions.

Non-iron alloys are the most popular to recycle because they are easy to haul in, and easy for the company to reuse. Some examples of such metals include aluminum, copper, tin lead, zinc, nickel, and titanium. Even some alloys, such as brass, are categorized as non-ferrous. Some commodities that are made up from these minerals include batteries, soda cans, catalytic converters, compressors, and car wheels. The most popular recycled ferrous metal is steel, which is a carbon-containing iron alloy.

Metal Recycling Tips

If you want to do your part and begin recycling within your community, the best place to start is right at home. Keep in mind the things you often use in your home already that are made of metal that can be recycled. Items such as soda cans, appliances, tools, tin foil, jewelry, and batteries are common metal goods people use every day. See our blog, “Where to Look for Sellable Scrap Metal in Your Home” to learn more examples.

When completing this years’ spring cleaning checklist, think about these types of materials you would normally consider trash, and recycle them instead. If you have large appliances you want to get rid of or trash, such as washer and dryers or lawn mowers, call a local recycling center and see if they offer pick up services. This way you are still doing your part for the environment, without even breaking a sweat!

If you wish to recycle ferrous metals, such as steel, make sure you call ahead to ask a scrap yard if they recycle these kinds of materials. Some metal salvaging companies will accept prepared and unprepared steel; while others do not have the market to accept steel and iron alloys.

Once you figure out that recycling scrap metal can be easy, there is no end to the environmental contribution you can offer. There is no need to throw away old appliances, junk cars, pop cans, and other alloy commodities when they can all be reprocessed and reused. Just like all recycling, scrap metal recycling is infinitely beneficial to our planet.

How to Recycle Metal in Indianapolis

Call Zore’s Recycling at 317-244-0700 to recycle scrap metal and make some fast money at the same time. We are a professional Indianapolis scrap metal recycling center that accepts and recycles all metals in any condition. Best of all, we pay cash on the spot for them! Recycle all sorts of stuff, including sheet metal and beams, cars, boats, construction equipment, power tools, old electronics, and more! Request a free estimate, today.

The 7 Steps to Metal Recycling

Posted on February 26, 2019 by admin

Recycling metal is a vital initiative that every person on Earth should take part in; not only because it helps to preserve our natural resources and reduce the need to mine for new ores, but also because it protects our planet from harmful emissions created by the entire mining and manufacturing enterprise. If you would like to do your part to help our environments sustain healthy stasis for centuries to come, start by creating a simple recycling routine at home or in the office. Collect soda cans, soup cans, food cans, and all other everyday scrap metal commodities, even broken appliances and tools, and then take your collection to a local metal recycling drop off location or scrap yard. You will be helping the environment and making some cash at the same time!

In the meantime, you may be more motivated by learning just how metal is recycled from start to finish. It happens in various ways all over the world, but here in the U.S., most metal refining is done in 7 steps. Continue reading to learn them all right now!

Indianapolis Metal Recycling 317-244-0700

Step ❶ – Collection

Metal scraps are collected, from soda cans and food cans, to sheet metal, plumbing materials, construction materials, power tools, farming equipment, machinery, electronics, appliances, junk cars, auto parts, and more.

Step ❷ – Sorting

As scrap materials come in to the recycling center, they are separated from the mixed scrap metal stream and sorted according to the type, weight, and color. Typically, this step is automated, and implemented using sensors and magnets.

Step ❸ – Processing

Once metals are separated into categories, they are shredded for processing. This makes metal melt faster using less energy. You see, small shredded metal material retains a higher surface-to-volume ratio.

Step ❹ – Melting

Shredded scrap metal will then be placed into a large furnace for melting. Centers have separate furnaces designated and designed to melt down particular types of metal. Depending on various factors, the actual time metal takes to melt will range from a few minutes to a few hours.

Step ❺ – Purification

Metal refining centers want their final products to be high quality and free of impurities, which is why scrap metal is purified after the melting stage. Electrolysis is the most common and accepted method of metal purification in the recycling industry.

Step ❻ – Solidifying

During this stage, metals take a ride on a conveyor belt where they are shaped into bars or sheets, and cooled to a solid form. These forms are dependent on the type of metal and intended application. For instance, aluminum is formed into small sheets, while steel is typically formed into blocks.

Step ❼ – Transporting the Metal Bars

After the metals have cooled and solidified, they are ready to be transported to factories for re-use. Factories use reprocessed metals as raw materials, which uses substantially less energy to mine virgin materials.

Where to Recycle Metal in Indianapolis

Indianapolis Metal Recycling 317-244-0700

Call Zore’s Recycling at 317-244-0700 to recycle scrap metal for cash in Indianapolis, Indiana. We pay top dollar for all metals, regardless of age or condition. We buy vehicles, equipment, sheet metal, electrical wiring, computers, auto parts, power tools, appliances, and much more. And we guarantee to pay you cash on the spot! Call 317-244-0700 to make fast cash, today!

Recycle Metal to Make Some Extra Holiday Cash!

Posted on October 19, 2016 by admin

Indianapolis Metal Recycling 317-244-0700

With the busy holiday season just ahead of us, there is no better time than right now to start saving up some cash for extra spending money. Whether you are a party-planning enthusiast who throws a Halloween bash every year, a cook who loves to cater to dinner guests on Thanksgiving, or a grandparent who tends to go a little overboard with Christmas gifts for the kiddies, extra money is always a good thing to have.

One of the best ways to make some fast cash, and clear out all the junk from your home at the same time, is to recycle metal! Any pieces of metal junk you have laying in or around your property is worth cash to many scrap metal buyers. Continue reading to learn what you can recycle for cash and where to go to get the best returns for your scrap metal!

Metals to Recycle

Virtually anything that contains metal can be sold for cash and recycled. Things like food cans, electronics, vehicles, auto parts, boats, power tools, appliances, sheet metal, electrical wiring, construction equipment, lawnmowers, trailers, instruments, plumbing pipe, and more, contain valuable amounts of metal that can be extracted, recycled, and reused. If you have any of these items in your home that you no longer use, consider selling them for instant profit! Keep in mind that the amount of money you receive is entirely dependent on two factors: 1) the amount you have, and 2) the current market value for metal.

Types of metal that are recyclable include:

♻ Aluminum
♻ Steel
♻ Iron
♻ Copper
♻ Tin
♻ Brass
♻ Lead
♻ Zinc
♻ Nickle
♻ Tungsten
♻ Cobalt
♻ Chromium
♻ And more

Scrap Metal Buyers

There are various outlets for selling scrap metal in your town. The most common include scrap metal recycling centers, junk yards, used car lots, metal refineries, and independent metal buyers. But be careful of fly-by-the-night metal buyers who scam and run. You want to choose a company that has a good and long-standing reputation within the community to ensure you receive honest and fair service.

One way to determine if a company is trustworthy is by their amount of experience. Companies that have been doing business for several decades are still in business because they are good at what they do and have been good to their clientele. So when you are ready to sell your scrap metal for cash, select an Indianapolis metal recycling center that has been in business for a long time and has the assets to prove
they are the real deal.

Indianapolis Metal Recycling

Indianapolis Metal Recycling 317-244-0700

Call 317-244-0700 to recycle metal for cash in Indianapolis, Indiana. Zore’s Inc. has been a family owned and operated company for over 75 years, and continues to make customer satisfaction their number one goal in their metal recycling division. We pay cash on the spot for all the metals mentioned, and more! Call us at 317-244-0700 to request a free estimate for Indianapolis metal recycling, today.

Scrap an Old Air Conditioner for Cash

Posted on October 10, 2016 by admin

Indianapolis Metal Recycling 317-244-0700

Now that temperatures are dropping and autumn is here, people are making the switch from air-conditioning to heating. And during this time, many of these same people are throwing out their old, broken-down air conditioners with plans to purchase new ones next year. So where do all these old air-conditioners go? If disposed of properly, they go to a scrap metal junkyard. Here, they are dismantled for all their valuable metal parts, and reused in various ways.

Continue reading to learn more about scrap metal air-conditioners and how to profit from recycling them.

Air Conditioner Recycling

Because air conditioners contain Freon refrigerant, it is important that they are disposed of properly. In most cases, if you want to recycle and air conditioner, you must hire a licensed professional to remove all Freon refrigerant and residual oils first. Most scrap metal recycling companies will not accept air-conditioners that still have Freon in them. This is for safety reasons. And keep in mind, it is illegal to remove the Freon yourself. Attempting to do so can result in a hefty fine from the Environmental Protection Agency (EPA).

Making Money

Indianapolis Metal Recycling 317-244-0700

There are several metals inside and air conditioner that make valuable and worth. These include copper, steel, aluminum, and more. The amount of money a junk AC unit will teach you depends on the condition that the metal components in the current market prices for that particular metal. The metal is measured by weight, and the weight determines the amount of cash you will receive for selling it.

Many people recycle their air-conditioners whole, which burns them a set dollar. But you can earn more if you dismantled air-conditioner first, and then sell each part individually. Since this require specialized tools and a certain degree of engineering knowledge, most people do not choose this option. It is more cost-effective to simply sell the air conditioner as a whole.

Scrap Metal Buyers

If you have an old air conditioner you wish to sell, choose a reliable resource to earn the highest investment for your scrap metal. Popular sources for selling old junk air conditioners include metal refineries, junk yards, and scrap metal recycling companies. Just be sure to select a scrap metal buyer that has experience and a good reputation within the surrounding community. These are the type of scrap metal buyers you can trust.

Indianapolis Metal Recycling

Indianapolis Metal Recycling 317-244-0700

Call Zore’s Recycling at 317-244-0700 to recycle metal appliances in Indianapolis, Indiana. We are a family-owned and operated business that has served fish usurer communities for over 75 years, which means you can trust us for the highest returns for scrap metal in town. Call 317-244-0700 to request a free estimate for Indianapolis metal recycling services, today.