How to Recycle Junk Appliances in Indianapolis

Old or broken appliances can still be put to good use. All you have to do is call your Indianapolis scrap metal recycling center and have them pay you for your junk! Not only will they pay you cash for the appliances you recycle, but some might haul it away for you! Most scrap metal companies in Indianapolis offer these services, but not all, so do your research!

Continue reading to learn how to recycle junk appliances in Indianapolis for a cash payout on the spot!

Appliance Disposal Indianapolis Indiana 317-244-0700
Appliance Disposal Indianapolis Indiana 317-244-0700

Indianapolis Junk Appliance Recycling

There are so many recyclable materials in junk appliances. Washer and dryers, refrigerators, microwaves, ovens, dishwashers, ranges, water heaters, water softeners, HVAC systems, and even the kitchen sink can be recycled for their metal. Metal is what makes these items lucrative in the recycling world. Metals like aluminum, steel, iron, copper, and more are popular for recycling because they are reusable and serve many purposes. Below is a list of common appliances and the metals they contain.

Review the list below to better understand what items you might have on hand that can be recycled for cash. Not only can you help the environment, but you can also make a quick buck while doing it!

Top Appliances You Can Recycle:

Refrigerators

There are internal coils inside refrigerators that are made from copper and aluminum. Copper is a fantastic conductor of heat and electricity, and aluminum is light in weight, malleable, and highly purposeful. Externally, many refrigerators are made from steel or stainless steel, a very strong and durable metal. All of these materials are recyclable and valuable. It is important to recycle refrigerators through a well-established and licensed scrap metal company to ensure that Freon, the refrigerant gas, is disposed of safely and properly.

Washing Machines and Dryers

The wiring within a washer and dryer set is made up of copper. Again, copper is a highly advantageous, naturally occurring metal that is an effective conductor of heat and electricity. The main casings are made from strong steel, which is another highly useful and recyclable material. Even if broken or 30 years old, they can be recycled for a profit!

Water Heater Tanks

Water heater tanks are great sources of reusable metal. Whether yours is old, broken, or obsolete, you can take it to a local scrap metal recycle center and have it scrapped for its aluminum and copper components.

Stoves

Stoves generally contain a large quantity of metal, namely cast iron, but also aluminum and copper. Grills, although not technically an appliance, also contain metal that can be recycled.

Dishwashers

Any plumbed appliance, like washing machines and refrigerators, will contain copper wiring and similar plumbing components made of metal. The motor generally contains the most valuable metal content, which makes them great for recycling.

Air Conditioners

Whether commercial, residential, or window, air conditioning units contain a good deal of metal, including copper wiring and copper components. From the inside out, air conditioners can be scrapped for recycling purposes.

Additional Recyclable Items

In all other appliances, things like compressors, motors, tubing and wiring, piping, sheet metal, and more are dismantled from junk appliances and recycled in addition to the parts listed for refrigerators and washers and dryers. Copper wiring, metal components, and sheet metal are the most sought-after materials for metal recycling. Start making a profit today!

If you have old or broken appliances around the house or office, sell them for recycling! Contact Zore’s Recycling at 317-247-8484 for appliance recycling in Indianapolis, Indiana. We pay cash on the spot for all scrap metal materials and items, including refrigerators, stoves, dishwashers, HVAC units, plumbing, and more.

Related Posts:

Frequently Asked Questions About Recycling Appliances
Why You Should Upgrade to a Modern Air Conditioner This Summer
Basic Lineup of Commercial HVAC Ductwork Parts

What You Can and Cannot Put in Your Rented Dumpster

Whether you are a construction manager preparing to clean up a finished site, a real estate investor in need of garbage management for an upcoming flip, or a homeowner who has been pushing off that Spring cleaning to-do list for far too long, dumpster rental is always a convenient and cost-effective way to go. But renting a dumpster comes with some rules, namely what you can toss inside of it.

Before getting started on your container-worthy project, continue reading to review what you can and cannot put in your rented dumpster, plus a bonus tip on where to get the best roll-off service in Central Indiana.

Dumpster Rental Indianapolis Indiana 317-244-0700
Dumpster Rental Indianapolis Indiana 317-244-0700

What You Can Throw Out in a Dumpster

Although all container rental companies are different in terms of what they accept in their dumpsters, there is a general rule of thumb you can use to base your trash-tossing decisions on while you work. For the most part, dumpsters and roll-off containers are best reserved for things like landscaping waste, lumber/wood, construction scrap, renovation debris, wooden furniture, Alkaline batteries, and general garbage.

Landscaping Waste

Yard work can be a major undertaking in any scope, especially for larger properties and commercial buildings. Dumpster rental is a popular resource used by many who have large-scale landscaping projects to pursue. From tree limbs and branches to leaves, underbrush, weeds, rotted logs, and all other forms of green waste.

Wood and Lumber

Aside from yard debris, any form of wood or lumber is perfectly accepting for dumpster disposal. Things like leftover or warped lumber, tree removal scrap, and even wooden furniture are all accepted items for dumpsters and containers.

Construction and Renovation Scrap

Construction scrap like drywall, siding, roofing, metal materials, paper waste, and more are common dumpster-accepted items. Additionally, debris left over from home improvement or renovation work, are items that go in a dumpster. You have seen roll-off containers and dumpsters are construction sites many times over in your life, and for good reason. They work well to mitigate and manage garbage during construction and afterwards for post-construction cleaning.

Alkaline Batteries

Alkaline batteries, like the ones we use everyday in our alarm clocks, TV remotes, and favored electronics, are acceptable items to put in a dumpster. Although batteries such as AAA, AA, C, D, button cell, and 9 volts can be tossed into a dumpster, it is strongly encouraged to recycle used batteries at the local Metal Recycling Center. You might even get paid!

General Trash

Miscellaneous trash is also commonly accepted for dumpster-use. This can include a vast array of trash, including cardboard boxes

Items That Might Not Be Dumpster-Approved

Again, not all container companies are the same when it comes to their regulations on what can be put in their dumpsters, but most do not accept a base list of items, or they recommend alternative disposal methods for certain items. These commodities might include upholstered furniture, mattresses, box springs, appliances, electronics, aerosol cans, and food scrap. Appliances and electronics, regardless of condition, should be recycled rather than tossed out.

Things that can NEVER be thrown away in a dumpster:

Freon
▷ Chemicals
▷ Hazardous Waste
▷ Biological Agents
▷ Flammable Items
▷ Medical Waste
▷ Toxic Building Materials (i.e. asbestos)

*Contact the local sanitation department in Indianapolis to learn how to dispose of these items.

Dumpster-Approved Items That Usually Come With a Weight Limit:

▷ Scrap Rebar
▷ Bricks
▷ Concrete

Are you looking for affordable and fast container roll-off and dumpster rental services in Central Indiana? Contact Zore’s Recycling at 317-244-0700 for hassle-free container services and scrap metal recycling in Indianapolis, Indiana.

Related Posts:

Can I Recycle Pre-Painted Metal?
How to Dispose of an Old Metal Shed
Outdoor Items You Can Recycle for Cash This Spring

Fundamental Guide to Cleaning Stainless Steel

Stainless steel commodities are a prevalent modern-day feature in many homes and offices. Its aesthetically-pleasing finish along with its durability and resistance to corrosion has made it a popular choice for appliances, countertops, cabinetry, bar tops, furniture, plumbing fixtures, picture frames, floors, walls, backsplashes, and much more. In order to preserve the stunning look of stainless steel, it is important to use proper cleaning techniques and products, as well as a standard level of routine maintenance and care.

Continue reading to learn some effective tips for cleaning and maintaining stainless steel commodities, like appliances, work benches, tools, statutes, and more.

Indianapolis IN Stainless Steel Recycling 317-244-0700
Indianapolis IN Stainless Steel Recycling 317-244-0700

Stainless Steel Cleaning Requires a Special Approach

Stainless steel, although highly durable, requires a certain degree of cleaning and care. Basic cleaning for most commodities calls for a clean washcloth, mild soap, and a good rinse; but stainless steel is not like other surfaces and requires a specific and unique approach to cleaning. In fact, don’t think of it as cleaning, see it more as polishing and buffing. It takes elbow grease and patience, but proper cleaning renders flawless and worthwhile results.

Do Not Use Soap and Water to Clean Stainless Steel

Regular soap and water will not work on stainless finishes. This will only jeopardize the integrity of the surface, potentially causing irreversible damage. Instead, always use stainless steel cleaning products that are advertised and specifically manufactured for cleaning stainless steel. But in most cases, all you will need is a clean, dry, microfiber cloth!

Microfiber Rags are an Essential Tool for Polishing Stainless Steel

Stainless steel surfaces are best cleaned and polished with a simple microfiber cloth. But for dirtier surfaces, a stainless steel cleaning product used in combination with a microfiber cloth is most likely necessary. Keep in mind that it will take a few minutes to buff away the remaining cleanser residue, and then polish out all the wipe marks, but don’t give up because the end result is well worth it every time!

Stainless Steel Requires Routine Maintenance

Overtime, depending on the environment in which it’s located, stainless steel accumulates contaminants and residues that cause the finish to look dull, stained, or uneven. Contaminants like free iron deposits and other metals are a major threat to stainless steel.

A layer of low chromium can form, thus reducing its resistance to corrosion. One type of treatment that is recommended for eliminating these kinds of contaminants and restoring the finish is called pickling and passivation. These are acid-based treatments that remove layers of low chromium and restores a stainless steel finish.

Are your stainless steel commodities far past the point of restoration? Sell them for cash on the spot! Contact Zore’s Recycling at 317-244-0700 for the most profitable and hassle-free steel recycling in Indianapolis, Indiana. We accept appliances, electronics, vehicles, car parts, and more.

Related Posts:

Why is Stainless Steel So Popular These Days?
Is Aluminum Better Than Stainless Steel?
How to Support Steel Sustainability

Indianapolis Metal Recycling
Indianapolis Metal Recycling

Is it True That Copper Can Kill Bacteria?

Copper is an extraordinary metal. It is a naturally-occurring ore with a long list of amazing properties. And when we say, amazing, we really mean it! Copper is so amazing that it has the ability to abate bacterial growth. In fact, copper kills bacteria, like the ones that transmit illnesses no one wants to come down with; some of which can be very dangerous. From colds and influenza’s to viruses, infections, and more, copper can protect us from health conditions that commonly spread by touch.

Continue below to learn more about the antibacterial properties of copper, including how it is applied to our benefit.

Indianapolis Indiana Copper Recycling 317-244-0700
Indianapolis Indiana Copper Recycling 317-244-0700

Physical Properties of Copper

Copper is highly ductile, making it easy to form and work with. You can find copper in the form of jewelry, art, pipes, and more. You can form it into just about anything! Additionally, copper is tough, plus it contains a natural chemical makeup that renders it highly resistant to corrosion. You can only imagine the usefulness of a metal that doesn’t rust or corrode!

Aesthetically, copper is appealing to the eye. Although there are various grades of copper, ranging in hues from yellow golds and rich oranges to deep reds and browns, when oxidized, copper turns green! Because copper is so brilliant and lustrous in color, it is applied artistically in all sorts of industries.

Bacteria Fighting Properties

Copper has been used throughout history for medical purposes, even as far back as ancient Egyptian times. Text was discovered that revealed ancient Egyptians used it to preserve food and water, while evidence shows that copper workers and copper smelters were not affected by the deadly Cholera outbreak in mid-nineteenth century France.

Nowadays, we do not need to rely on copper to treat or kill bacteria because we have antibiotics and sanitizers to do that. However, copper is still regarded as an excellent killer of bacteria, which is why it is applied in other forms, which protect us against illness.

So, how does copper do it? Well, the truth is, no one really knows. It is suggested that copper can kill bacteria because it has the ability to oxidize lipids and proteins. Others infer that copper bonds with other molecules in a way that takes the place of another essential one, like zinc. You are familiar with hydrogen peroxide as an anesthetic; well, it has also been thought that because the exposure of copper to bacteria causes hydrogen peroxide to develop, it is why it can kill bacteria.

Common Copper Applications for Antimicrobial Purposes:

Medical Facility Surfaces: Countertops, Doorknobs, faucets, locks, light switches, bed rails, and more.

Laboratory Equipment: Medical instruments, test tube holders, centrifuges, and more.

Drinking Water Treatment: Piping material, water filters, water transportation, and more.

As you can see, copper is a vital natural resource that should be preserved and protected as much as possible. Be sure to recycle copper metal to support this initiative! Contact Zore’s Recycling division at 317-244-0700 for professional Indianapolis IN metal recycling services that PAY YOU cash on the spot! We accept appliances, electronics, equipment, construction scrap, plumbing scrap, and all other forms of metal and copper!

Related Posts:

5 Types of Bronze Alloys
4 Types of Metal That Do Not Rust
Common Categories of Corrosion Resistant Alloys

Indianapolis Metal Recycling
Indianapolis Metal Recycling

Basic Lineup of Commercial HVAC Ductwork Parts

If you are a commercial property builder or proprietor, there will come a time for you to procure and install a proper heating and cooling system. It is important to choose a compatible HVAC system in order to meet the unique indoor air quality needs of the business, while also withstanding any outside environmental influences within a property’s surroundings. Knowledge can help you achieve this objective.

Continue reading for a basic overview of common commercial heating and cooling ductwork parts, as well as where to safely dispose your leftover scrap metal plumbing and HVAC parts in Indiana.

Scrap HVAC Recycling Indiana 317-244-0700
Scrap HVAC Recycling Indiana 317-244-0700

Fundamental Framework of a Ductwork System

Whether residential or commercial, all properties will require ductwork for their heating and cooling systems. In a traditional set up, ductwork is installed within the ceilings of a building, which connect from room to room through a rectangular opening and vent cover. It is important for ductwork to have certain qualities in order to evenly distribute conditioned air throughout the property, whether hot or cold.

For this reason, most ductwork is made from galvanized sheet metal, usually steel or steel alloys. Steel retains various desirable properties, including a lower melting point, higher malleability, durability, and better heat distribution. These properties, along with several others, make steel a perfect material for all sorts of applications, like construction, art, metalwork, and more.

Common Parts of Heating and Cooling Systems:

Air Handler Unit (AHU)

Also known as simply an air handler, this is a part of the ventilation system that is responsible for regulating and circulating conditioned air. Traditionally, an air handler unit is a big, galvanized metal box that contains heating or cooling elements, as well as a blower, filter racks or chambers, sound attenuators, and dampers. An outdoor air handler unit is known as package unit (PU) or rooftop unit (RTU).

Dampers

Dampers are designed to regulate air flow within a ventilation system. Generally, there are two kinds: volume control dampers, which enable the volume of air flow to be adjusted, and combination smoke and fire dampers, which seal off a duct if they detect smoke or fire. Common commercial-use dampers include air measuring, thermal, marine, balancing, back draft, industrial and heavy duty, tunnel transit, low leakage, relief, and zone dampers.

Duct fittings

Duct fittings and configurations, such as tees, reducers, and ells, are designed to equalized duct pressure and therefore, balance airflow. Vent caps are also considered ductwork fittings, as they provide protection for the open end of a ductwork vent stack.

Outlets

Outlets, including registers, diffusers, and grilles, are in charge of allocating the airflow in a truck-and-branch ductwork design, which is common in commercial heating and cooling plans.

Register Box

Also called a floor box, this HVAC ductwork part is basically a galvanized steel grille that opens and closes as air is distributed through the system.

Plenum

When it comes to commercial HVAC ductwork, the plenum is an important consideration. There are two types, the supply plenum and the return plenum. Both are essentially air distribution boxes for the central distribution and collection air flow unit of the heating and cooling system.

Take-Offs

These ductwork parts are round, oval, or rectangular shaped fittings that are responsible for regulating and correcting the amount of airflow from the main duct into each branch duct.

Vents

Ductwork vents are what we can see from the living quarters of a property. They are the mesh or screened metal coverings that are installed over the rectangular opening that connects to the air handlers.

Do you have a surplus of scrap plumbing and HVAC parts that you need to dispose of? Contact Zore’s Recycling at 317-247-8484 to get paid cash on the spot for your scrap metal construction and building materials in Indianapolis, Indiana. We accept all metal scrap and appliances, regardless of condition.

Related Posts:

Frequently Asked Questions about Appliance Recycling
Furnace Maintenance 101
How to Scrap an Old Air Conditioner for Cash

Indianapolis Metal Recycling
Indianapolis Metal Recycling

Furnace Maintenance 101

Your furnace will soon be on the clock 24/7 now that Fall is here. But if you do not properly service your furnace system on a bi-annual basis, you could be stuck overpaying for heat and energy this season. To avoid costly utility bills, chilly indoor environments, and premature HVAC replacement, be sure you know how to take good care of your furnace.

Continue below for a little furnace maintenance 101, plus learn where to sell an old or broken furnace in Indianapolis.

Appliance Recycling Center Indianapolis IN 317-244-0700
Appliance Recycling Center Indianapolis IN 317-244-0700

How to Ensure Seasonal Furnace Reliability

A reliable furnace, one that provides heat efficiently when you need it, is only possible when it is serviced on a routine basis. Caring for your furnace should be one of the most important tasks around the house in wintertime. An optimal-working furnace maintains healthy indoor air quality, dependable comfort, and steady utility bills.

Furnace Filters

It is vital to clean or replace your furnace filters each month, but there is much more to the maintenance process. On top of furnace filters, several other parts of a heating system need regular attention. This includes the blower, internal housing, burners, heat exchangers, vents, and more.

Heating Element Inspections

No matter which type of fuel your furnace burns, the heating element or burner needs to be checked every month for damages or noticeable wear and tear. Common fuels are wood, oil, gas, and propane. Look to your owners’ manual to learn where the burner is located and how to inspect it for anomalies.

Carbon Monoxide Detectors

Malfunctioning vent systems and burners can cause dangerous situations. It is important to understand that a poorly-maintained heating system can lead to a buildup of carbon monoxide, which is a colorless, odorless, and deadly gas that is extremely dangerous to people and pets. You should always have functional carbon monoxide detectors in your home in case of a gas leak. On a yearly basis, it is imperative to have a professional inspect your system for malfunctions such as these, as well as cracks in the heat exchanger and more.

Furnace Cleaning

Another important part of furnace maintenance is cleaning. Dirt is a big problem for furnace systems, and if accumulated in large amounts, can reduce your unit’s performance and indoor air quality. Poor indoor air quality causes respiratory irritations and illnesses, like asthma and allergies. Filters must be cleaned, heat exchangers have to be cleared of dirt and debris, the blower motor needs cleaned, as well as the housing and the internal drain passages.

Safety Features

The last part of furnace maintenance is to check its safety features. This includes the roll-out and pressure switches, the vent fan, and the blower motor.

Is your furnace old or broken, so now you must replace it with a new furnace? If so, you can sell your old one for cash on the spot! Contact Zore’s Recycling at 317-244-0700 for the most profitable and hassle-free electronics recycling and appliance recycling in Indianapolis, Indiana.

You Should Also Read:

Frequently Asked Questions About Recycling Appliances
Which Metals Make Junk Appliances Valuable?
Types of
Household Electronics You Can Recycle

Indianapolis Metal Recycling
Indianapolis Metal Recycling

Why is Stainless Steel So Popular These Days?

Stainless steel metal is something we are seeing more and more these days, everywhere you look. This special metal has a much higher chromium content, as well as a translucent coating that prevents discoloration and corrosion. In fact, these attributes are often the reason why stainless steel, and the commodities manufactured with it, are so highly sought after. Industries all across the nation benefit from stainless steel applications and assets, including food handling, food processing, medical instruments, hardware, appliances, architecture, and much more.

Continue reading to learn more about the benefits and applications of stainless steel, and where you can recycle steel for cash on the spot in Central Indiana.

Stainless Steel Recycling Indianapolis Indiana 317-244-0700
Stainless Steel Recycling Indianapolis Indiana 317-244-0700

The Value of Stainless Steel

Stainless steel, also known as inox steel or just inox, is an alloy that has a minimum of 10.5% chromium content and a maximum of 1.2% carbon content. Some of the most admired qualities of stainless steel is its resistance to staining, corrosion, and oxidation (rust). For this reason, it is often used in kitchens and food processing plants, as well as industries like medical, electrical, petrochemical, manufacturing, automotive, and more.

Stainless steel comes in many grades and finishes, all of which offer their own unique appeal or performance. Compared to carbon steel, stainless steel has a much higher chromium content, so when exposed to conditions that would otherwise make it rust or corrode, it instead forms a passive coating of chromium oxide that prevents further deterioration. Not only does it not corrode and does not require a protective coating, but it is also easy to clean and sterilize.

Stainless vs. Mild Steel

When it comes to the primary differences between stainless steel and mild steel, it all comes down to strength, ductility, hardness, aesthetics, and cost. Stainless steel contains additional alloying elements, including chromium, nickel, and molybdenum, all of which enhances the mechanical and chemical properties and makes it resistant to corrosion. Mild steel is less brittle but can be strengthened more by adding carbon.

Did you know you can recycle your left over steel and scrap metal materials, plus earn a profit? Contact Zore’s Recycling at 317-244-0700 to get paid cash on the spot for steel recycling in Indianapolis, Indiana.

You Should Also Read:

Common Categories of Corrosion Resistant Alloys
Is Aluminum Better Than Stainless Steel?
How to Support Steel Sustainability

Indianapolis Metal Recycling
Indianapolis Metal Recycling

Why You Should Upgrade to a Modern Air Conditioner This Summer

In the recent years, the technology for central air conditioning has advanced in a major way. This improved technology in the heating and cooling industry provides consumers with a wide range of impressive and highly-beneficial incentives. But the overall “umbrella” incentives for such innovation includes financial relief, enhanced comfort, and humanitarianism. So, if you have not upgraded your AC system yet, now is the perfect time to get it done!

Continue reading to learn more about the benefits of upgrading to a modern air conditioner unit, as well as, how you can make some fast cash by recycling your old one!

Appliance Recycling Indianapolis Indiana
We Buy Junk Appliances! 317-244-0700

Efficiency

In terms of humanitarianism, the improved technological advancements made to central cooling have increased HVAC efficiency by leaps and bounds. This means we use less energy to heat and cool our homes and buildings, and in turn, conserve energy by not needing to use as much to heat and cool our homes as compared to before. Improved energy efficiency also provides financial relief, because when less energy is used to run an HVAC system, less energy is billed for at the end of each month.

Indoor Comfort

With new technology that gives us programmable thermostats, we can keep our indoor environments more comfortable than ever before by setting exact temperatures at specified times of the day and night. This also reduces energy consumption since you can set your central cooling system to turn on and off when you are not home, or turn down when you are sleeping. In fact, new HVAC zoning technology allows property owners to program which rooms get conditioned air and when. This drastically improves energy efficiency, reduces energy consumption, and saves on energy bills.

Wi-Fi Technology

On the topic of programmable thermostats, Wi-Fi thermostats offer the same benefits as programmable ones, such as digital interfacing, temperature control, and time schedules. But they offer them in the smartest way possible, plus even more high-tech features! Their feature designs offer improved energy-efficiency, remote programming, Geo-fencing, and even feedback on consumption and efficiency. Wi-Fi thermostats have to be synced with a Wi-Fi router, and then property owners can check and adjust their thermostats via an online application, tablet, computer, or smart phone.

Discreet Operation

The advancements in technology has given central cooling a quitter, more discreet operation. Before, air conditioners were noisy, and didn’t deliver optimal indoor air quality. But now, newer models not only provide health benefits, they are hardly noticeable anymore. In fact, when loud noises occur, it is usually a sign of a problem or malfunction.

How to Recycle Scrap Appliances for Cash in Indianapolis

Call Zore’s Recycling at 317-244-0700 to get paid cash on the spot for scrap appliances in Indianapolis, Indiana. Our Indianapolis scrap metal recycling center pays top-dollar for HVAC units, kitchen appliances, electronics, any anything else made of scrap metal! Best of all, we guarantee to pay you cash on the spot! Call 317-244-0700 to sell your old air conditioner in Indianapolis, today.

How to Clean Cast Iron Rust Stains on Stainless Steel

Well anyone with a cast iron skillet knows not to leave it in a wet sink overnight. Yet, many of us still forget or neglect this rule of thumb, only to wake up to an unsightly ring of rust tarnishing their once bright and shiny stainless steel sink. Fortunately, this blunder is easily corrected. All you need are a few common household supplies, and a little elbow grease. Even if your sink is ruined from rust and oxidation, you still have the option of recycling it for cash at a local scrap metal yard. Then you can put that cash towards a new stainless steel sink!

Continue reading to learn all of this and more!

Metal Recycling Center 317-244-0700
Metal Recycling Center 317-244-0700

Rust Formation on Stainless Steel

Stainless steel isn’t exactly stainless. It is a chromium-based, ferrous metal, which means it is vulnerable to certain kinds of corrosion, such as oxidation, if it is not properly maintained. Oxidation occurs when oxygen and moisture come in contact with stainless steel. Upon such exposure, the properties in the metal will begin to interact with the properties in water and oxygen, which in turn, causes the iron in metal to corrode. Rust is simply a form of iron oxide.

What You Need to Clean Away Rust

Typically, simple baking soda solutions will do the trick when it comes to removing rust from metal. But for cast iron rust stains, you will need something a little stronger. An oxalic acid cleaner and a soft sponge are all you need, both of which can be found online or at your nearest grocery store. For oxalic acid cleaner, we recommend the Bar Keepers Friend® Soft Cleanser, which is a liquid version that does not contain any grit or abrasives. You can also use stainless steel polishes and cleaners, as well as, copper cleaners. You do not want to use anything caustic, or that contains harmful chlorides that will destroy the outer protective layer of your sink.

How to Get Started

The next time you leave your skillet in the sink, here is how to remove the residual rust stains:

🧼 Following the manufacturer’s instructions on your oxalic acid cleaner, apply a generous amount to the stained areas.

🧼 Dampen your sponge, and then scrub the cleaner into the stains, in the same direction of the grain.

🧼 Repeat the gentle scrubbing until you feel like the stain has lifted.

🧼 Then simply rinse your sink clean!

How to Scrap an Old Sink

If your sink is too old, or too stained to clean, you can recycle it at a local scrap metal recycling center. Some scrappers even pay for scrap metal, and an old sink is the perfect piece of scrap metal to recycle! After you recycle your old sink for cash, you can use it toward a brand new sink.

Indiana Scrap Metal Buyers Who Pay Cash on the Spot

Call Zore’s Recycling at 317-244-0700 to recycle steel in Indianapolis, Indiana. Not only has Zore’s Inc. been a family owned and operated company for over 75 years, we pay cash on the spot for your metal commodities. We accept cans, sheet metal, appliances, vehicles, auto parts, equipment, and more! Request a free estimate, today.

Frequently Asked Questions About Recycling Appliances

At some point, homeowners are bound to be faced with appliance repair and replacement needs. When this time comes, it is wise to know what to do with your old appliances in order to avoid unnecessary hassle, or worse, harm to the surrounding environment. If you have an old or broken down appliance that will be trashed and replaced soon, you should strongly consider appliance recycling as a convenient and free haul-away option.

Continue reading to review some frequently asked questions about recycling appliances for a head start!

Appliance Recycling 317-244-0700
Appliance Recycling 317-244-0700

Do I Need to Repair or Replace My Appliance?

You will know whether or not you need to repair or replace an appliance by having it inspected by a professional. If the cost to repair it is more than 40% of the actual value of the appliance, it may be worth your investment to replace it rather than having it repaired. If the repair cost is that high, it is likely that that appliance will experience another breakdown sooner or later. If the repair cost is minimal, or you simply need to replace a defective part, your appliance likely has some life left in it for now.

Which Kinds of Appliances Can Be Recycled?

Although not all parts of an appliance are recyclable, appliances these days contain various metals, all of which are 100% recyclable. Some other constituents may recyclable too, such as textiles, plastics, rubber, polymers, and more. Examples of recyclable appliances include refrigerators, microwaves, ovens, stoves, ranges, HVAC units, water heaters, water softeners, washing machines, dryers, boilers, electrical boxes, and dishwashing machines.

How Much Does it Cost to Recycle an Appliance?

If you choose a reputable scrap metal buyer in your town, recycling an appliance should be free of charge! In fact, you should make money from recycling an appliance! Most scrap metal buyers pay cash on the spot for used or broken down appliances, as well as, all other forms of scrap metal. You can expect to make anywhere from $20 to $200 depending on the quantity and quality of your scrap. The amount of money you get paid for your appliance will largely depend on the current metal values too.

Where Can I Recycle Appliances in Indianapolis?

Call Zore’s Recycling at 317-244-0700 for a profitable solution to safe and convenient appliance disposal in Indianapolis. Our scrap metal recycling center retains the latest advancements in technology, as well as, a highly trained and dedicated staff, which allows us to take old, broken, or leftover appliances off your hands, effortlessly. We also recycle appliance parts, such as blower motors, shells, wiring, cabling, and more. And we pay you CASH ON THE SPOT when you recycle appliances with us! Start by requesting a free over-the-phone quote, today!